|
MENU
ITEM
|
FACTORY
PRESET VALUES |
|
INPT
|
Input
Type: K.TC (Type K T/C) |
|
DEC.P
|
Decimal
Point Position: FFFF. |
|
RD.S.O
|
Reading
Scale and Offset: 4-20 mA dc = 0-1000 |
|
RD.CF
|
Reading
Configuration:
R.1=T (Tare enabled)
R.2=4 (10╡V resolution for unipolar & 25╡V resolution for bipolar)
R.3=F (Filtered value) |
|
S1.CF
|
Setpoint
1 Configuration:
S.1=A (Setpoint is active above)
S.2=U (Setpoint is unlatched) |
|
S2.CF
|
Setpoint
2 Configuration:
S.1=A (Setpoint is active above)
S.2=U (Setpoint is unlatched) |
|
S1.DB
|
Setpoint
1 Deadband: 0003 |
|
S2.DB
|
Setpoint
2 Deadband: 0003 |
|
OT.CF
|
Output
Configuration:
O.1=E (Analog output is enabled)
O.2=C (Analog output is current)
O.3=A (Analog output follows the display value) |
|
OT.S.O
|
Output
Scale and Offset: 0-1000 = 4-20 mA dc |
|
LK.CF
|
Lock
Out Configuration:
SP=E (Enable setpoint changes)
RS=E (Enable the RESET button in the run mode) |
|
SP1
|
Setpoint
1 Value: 0000 |
|
SP2
|
Setpoint
2 Value: 0000 |
| Sensor
excitation: 24 V dc |
Home
TOC 
Back